In 1934 but which never went into production...

Once the bearing security cover has been removed the spindle can be tapped out using a hammer and drift, this also removes the bearing on the other side. The speedo drive can them be gently tapped off...

  New cylinder and piston bolted in with a generous amount of oil used to assemble....

This morning, I noticed my Interceptor leaning at an odd angle. Investigation revealed a flat front tyre. I looked for a puncture, but all I could see was bubbles escaping around the valve stem and s...

The Rimini-based company, which had previously seen difficult times, ceased operations in September of this year. The factory in Rimini is closed. Rumor has it that the company logo was removed from i...

The day was cold, windy, also some rain and fog… perfect day to take my Pan America...

Frame and forks delivered at Stotford engineering for the necessary fettling to be carried out. They are going to use the standard T140 head bearings and adapt them to fit the KTM forks, then modify...