Custom throttle ?

This is a 2012 Custom V Rod MGM Harley Davidson by No Limit Customs.NLC MGM Custom bikes are the premier builders of V Rods if your looking to make a statement this is the bike for you....

Each person has something they’re good at. For some, it’s public speaking, writing, or chugging words, while for others, like Eak from K-Speed Customs, it’s a bit more interesting such as preparing...

In between, 1979-1980 Honda developed some powerful motorcycles with six-cylinders which was specially made for racing purpose. Now in these modern days, that kind of power-packed motorcycles was d...

Ever start out with a basic idea, only to get hopelessly carried away? A wheel swap and a simple suspension tweak were all that Frank Edens was planning for his...

This custom BMW R1100GS is the work of one of Poland’s pre-eminent custom motorcycle garages – Red Hot Chili Customs. The donor bike was bought from its former owner in Switzerland before being tra...

#custom #helmet #paint...

The Honda CX500 debuted in the late 70s and was manufactured into the early 1980s. Featuring a 497cc transversely-mounted v-twin making 50 horsepower, it would eventually develop somewhat of a cult fo...

What you see below is a custom-framed, snowmobile-engined motorcycle weighing just 320 pounds, powered by a 150-hp Arctic Cat F7 700cc two-stroke engine....

Very cool key for the Intruder, I would like one for my Sportster...

Https://youtu.be/ALO5oQZ_8EM?si=DxYQcrjNacQrIzBg...

  A lot of unanticipated work went into this assembly.  The geometry of the new body halves was different enough that I had some binding of the rotor when everything was tightened down. &nbs...

The throttle twist grip assembly is a two cable unit. The housing halves were in good shape except for severely pitted chrome on the top half.  ...

I determined that since the original screws are enough larger than the repro ones, that I could drill and re-tap the body for the original screws. After buying the special taps, I probably would have...