After cleaning, my bike is sparkling clean. The tires and chain are new.

Cleaning/lubrication...

Today I cleaned and lubed my Chain after 1300kms...should have done it early but yeah i am little lazy....used Motul cleaner and lube, the whole process took 20min, dirty hands and floor...but the end...

Early start to clean the bikes and do some maintenance....

So there was a small motorcycle bike event for the local shop, so decided to go and to check out a bike that they had in stock. at the same time I was meeting up with and old boss of mine that he was...

I'm not in the market, but what are your thoughts about buying a used Ducati with only 5k miles but with tires that look like this? ?...

So off out to Honister Pass to road test them. Perfect...

We have now arrived for a weekend of camping. ...

?...

The factory manual says that the cam bushings rarely need replacing unless there is very high mileage.  On mine, with the cams installed dry, there was a nice slip fit on the right (big) end, but...

Evening everyone! Just wanted to share something I just found out about the drivetrain. The chain sliders had uneven wear so I changed them and also bought new chain rings and chain... Some kms have...

Please help with how can clean off the rust on this and remove the grime for the signal and ignition housing....

I took the remaining parts off of the frame. We may have to replace the fork springs because they are really rusted. I then took a bucket of soapy water and scrubbed all of the dirt, dust and cobwebs...

The GB came with the original chain and sprockets when I bought it. The sprockets were in ok shape but the chain was 24 years old and had close to 10000 miles on it so I decided to change it out. It w...