Step 9 Remove Upper Triple Clamp 1. Using a plastic/wooden knife or fingernail, "pop" off the black plastic caps located on the "inner" end of each Clip-On. (1) Per Clip-On 2. Remove (1) 5mm All...

So that the motorcycle rider can talk with the passenger in the backseat, 1960s....

The pac-man Leo Vince sticker looked a little nerdy so I peeled it off with the help of an old hair dryer and some acetone to clean up the glue....

Although haven't had someone do this maliciously (yet) but find it pretty annoying that someone can just pull your keys out of the ignition willy nlly and kill my bike while I'm riding. know a couple...

??...

R1 Parts Required (all other parts are re-usable)  - Forks - Upper Triple Clamp - Lower Triple Clamp...

This is a step by step video including torque specs....

Shank Diameter Also called Major diameter. The diameter of a bolt is the Shank diameter, expressed in millimetres for Metric bolts. Because this is approximately the same as the Major or Thread diame...

DIY Bates Desert Racer Seat...

  An insecure part of me worried that the bike wouldn't be there when I opened the door to the 5x10 storage locker...

Hopefully re-fit the rear wheel, rear brake tomorrow...

Date: February 20, 2022 Started the ownership story of this bike in 2022. In February started looking for good options to buy, immediately interested in the option that looked like a Yellow Nyqued...

Summary: My charging system diagnosis procedure, modified over time to generally point out the problem through a series of steps. I try to follow it every time, as that way I don’t miss anything...

TZ1500 made from two TZ750 motors sharing a common crankshaft. It used to bend rods all too easily. Not sure where it is now....

Any screw, nut or bolt that falls in here is never seen again!??...