4 hours in the saddle except a 20-minute coffee stop. A couple of construction stops too. From 51 to 60 degrees....

The bracket has cracked .can it be repaired or do I have to get a new one .has it happened to any one...

Does this spark plug look burnt out or is this a normal look for one that's done a few thousand miles?...

Once again thinking over the project, I realized that there is no way to bypass this step, because the native YBR exhaust is too bulky and low. And what is a scrubber without an adequate exhaust? I ha...

Ended up in the ditch at the side of the road, no damage apart from the crash bung, not even a mark on the bike...

After the last shop scratched my wheels changing tires, I decided to buy the equipment and do my own changing and balancing going forward. I mounted a new set of Road Attack 4s yesterday, only now I s...

It's time to rework the rear of Sandy! Namely: redo the tail, make a new wing, integrate LED lights, and paint some elements. Make yourself comfortable, make some tea/coffee and let's go! As you reme...

Changing my rear tire so at the same time I thought I would install these LighTech chain slack adjusters. I love how precise they are and how easy it is to do an adjustment by counting clicks!...

Now it will be very convenient to glue the tank "inside" and disconnect it from the matrix. Putting the top 3 components together, I got a 2-part matrix, with which we work further in this sequence:...

It is a pleasure to welcome you again, dear reader! This is already our 6th meeting within the Sandy project. Today I will try to fully describe the process of making a fiberglass fuel tank for a scr...

What i can say for the time owning it -I mesure 1,66m and with the lowering kit Ride height is perfect ? -The heated grips are a absolut must ! -quick shift works great !...

We continue working on the Sandy project. For those who don't know yet - it is dedicated to building a unique scrumbler based on Yamaha YBR 125 motorcycle. Many people will say that it is strange, com...

When it arrived the other day I just threw it on quickly to see if I'd be able to get both seats on. When it rains the water filters through and when it's hot there's plenty of air flow under you....

It's time to work more closely on the front part of our Scrambler. There is plenty of space for creativity here, so I decided to do everything at once and little by little - what I had enough free ti...

I'm changing my battery in my 05 R1. I get to the part when you have to get to the screw and the YouTube video says up use 5/16 but driver, but my screw is round so it won't fit. Headed now for some...

And we keep going on and on... As you remember, it was decided to introduce a more powerful fork - from Suzuki GN 125, and also at the same time to install roller bearings in the steering column. But...

Hello everyone! You and I continue to work on the Sandy project - a small scrambler based on the Yamaha YBR125 motorcycle....